Yousef Steel stands out as a top manufacturer and supplier of ARCELOR 450 Sheets and Plates in Riyadh, Saudi Arabia. We provide top-notch wear-resistant steel solutions tailored for industries that operate in tough, abrasive environments. Our ARCELOR 450 is crafted using cutting-edge quenching and tempering techniques, resulting in a remarkable blend of hardness, strength, and toughness—perfect for heavy-duty applications. At Yousef Steel, we prioritize quality, precision, and compliance with global standards, ensuring that our ARCELOR 450 sheets and plates meet the rigorous demands of sectors like mining, construction, earthmoving, and material handling.
These ARCELOR 450 Sheets and Plates are alloyed with carbon, manganese, silicon, chromium, and nickel, enhancing their wear resistance while still allowing for good weldability and formability. With a nominal hardness of around 450 HBW, they are slightly softer than ARCELOR 500 but offer better toughness and higher impact resistance. Available in thicknesses from 6 mm to 100 mm and widths up to 3500 mm, they come in either quenched or quenched-and-tempered conditions. Their mechanical properties ensure they can withstand impact and sliding wear effectively.
Item: ARCELOR 450
Thickness : 5mm to 150mm
Length : 6,000mm to 12,000mm
Width : 1,500mm to 2,500mm
Heat Treatment: N, Q+T
Surface Point : EP, PE, HDP, SMP, PVDF
| Plate Thickness MM | %C Max | %Mn Max | %P Max | %S Max | %SI Max | %Cr Max | %Ni Max | %Mo Max | B Max | CE Max | PCM Max |
| 6.0 – 20.0 | 0.52 | 0.34 | |||||||||
| 21.0 – 40.0 | 0.30 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.60 | 0.60 | 0.040 | 0.60 | 0.40 |
| 41.0 – 50.0 | 0.65 | 0.50 |
| Â | Hardness HBW | Typical yield strength MPa, |
| mm | (min – max 1) | not guaranteed |
| 3 – 80 | 425 – 475 | 1100 – 1300 |
| (80) – 100 | 410 – 475 | 1050 – 1300 |
| (100) – 130 | 390 – 475 | 1000 – 1300 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
You’ll find ARCELOR 450 Sheets and Plates used extensively in mining equipment, dump truck liners, crushers, hoppers, and chutes, where abrasion resistance is crucial. In the construction and industrial sectors, they’re utilized in loader buckets, mixer drums, conveyor troughs, and earthmoving machinery, providing a long service life and lower maintenance costs. Their exceptional toughness makes them ideal for applications that face both wear and high impact loads. With outstanding hardness, strength, and weldability, ARCELOR 450 sheets and plates are the go-to choice for industries looking for dependable and cost-effective wear steel solutions.
Yousef Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Riyadh, Saudi Arabia.
Copyright 2025 Yousef Steel. All rights reserved
