Dimensions of the produced panels:

Length up to 1250 cm
Width 100 cm

The thickness of the panels starts from 4 cm and the thickness of the rib is added 3 cm to 20 cm

Where the factory produces insulation boards of various thicknesses as they are manufactured on the latest production lines, the company has expanded the applications of using these panels where we use them in the manufacture of caravans and prefabricated buildings that are used as residential units, toilets, administrative offices and many other uses that are in line with the customer’s needs.

Sizes:

The building is manufactured in several sizes, according to the customer’s desire and given specifications

Types of caravans

Caravans fixed on a metal frame.

Caravans on a mobile trailer on wheels for long-distance transportation (trolls).

Technical Specifications :-

The metal frame is constructed from cold drawn iron bridges, cut into longitudinal and transverse suspensions, coated with a zinc base layer, and a Hummer coating.

Aspects: It consists of sandwich panels, injected with polyurethane, and the sides can be wrapped according to the desire of the customer, including

Sides of sheet / sheet iron. Light percolation – sheet / wood – wood / wood. The company can also use decorative iron, aluminum, or stainless steel.

Ceiling: The roof is made of sandwich panels, from the outside, the corrugated iron sheet, and from the inside a pre-painted iron sheet, t. All necessary closings are made from the two rainpaths to collect water in the rear drain pipe and all external and internal corners.

Sanitation tools: –

All sanitary fittings are supplied and installed from the bathroom base, sink and mixer tap

Doors and windows: –
Caravan is provided with doors and windows of sizes and numbers according to the client’s desire, from aluminum or PVC clips and stained glass>

Bottom chassis:

It is a longitudinal bridge (U8), 2 on the length of the chassis, where a 9 mm thick wood is installed between the upper and lower chassis, with cross beams from the (H) bridge 8 cm in width, and the chassis installed by means of 10 cm bonds between the upper chassis and the mechanism chassis, with 4 side flanges are installed and welded to the top bridge.

Floor:

The floor consists of the following:

The floor is built on the chassis of the car and is made of galvanized iron frame on the floor

With cutting inside the throat and fixed with the new chassis and isolate the floor with foam.

The floor is covered with Vervis wood.

With a lamination of the floor from the top, stainless steel is warmed with a folded on the circuit, and then an argon and sides are welded to make the floor a basin. Or the aluminum floor, shaded or glazed, as desired by the customer.

Roof:

It is one piece 10 cm thickness with the following specifications:

Detail of the galvanized iron frame shaving on the ceiling circle with cutting to cover it, and the inner face is separated from the outside by a wood frame.
The roof covering is pre-painted inside and outside of the galvanized steel sheet.

Injection of the roof with a polyurethane density of 45 kg per cubic meter by a high pressure injection machine.
Fifth: the front end: –

It is one piece 10 cm thickness with the following specifications:

Detail of a galvanized iron frame ring on the front end, to be wrapped on it.
Longitudinal cutting of the interface to strengthen and install the cooling device.

Front Facing Packaging: pre-painted galvanized sheet, outside and inside. (Or a fiberglass one piece and one outside).

Interface injection with a polyurethane density of 42 kg per cubic meter with a high pressure injection machine
Sixth: Aspects:

It is one piece 10 cm thickness with the following specifications:

Detail of a galvanized iron frame ring on the front end, to be wrapped on it.
The side profile is pre-painted galvanized sheet outside and inside (or fiberglass one piece and one outside).
Interface injection with a polyurethane density of 42 kg per cubic meter with a high pressure injection machine
Seven: Doors:

It is a galvanized ring, and the door is laminated from the inside, with a thickness of 8 mm, to secure the hands and hinges. The doors consist of the following:
Galvanized iron frame shaved on the door.
8 mm thickness sheet plating inside the door to install hands and hinges.
Covering the doors inside and outside, pre-painted sheets with a thickness of not less than 7 mm.
Inject the door with polyurethane with a density not less than 42 kg per cubic meter with the high pressure injection machine.
Installing an inch of refrigerated boxes.
Installing two hinges for each door.
Hand fitting for each shutter.
Install hooks on the doors to secure them when opened on the sides of the box.
The number of doors is two doors on the back end and one side door.

All profiles and outer corners are made of reinforced aluminum

These insulated walls are produced using modern production technology that allows the production of one piece without connections up to 2.5 meters wide, 9 meters long and of any required thickness from 4 cm to 20 cm

The body of the cold rooms is collected by (Looking System) in addition to (Male & Female).

The walls are insulated using Poly-Urethane injection using a modern high pressure injection machine produced by the Italian company O.M.S.

And equipped with a computer that controls all its operations, and the injection process is not allowed in the event of any error during operation, which confirms the efficiency of insulation and the absence of the chance of possible human error.

The company uses the latest sheet iron forming and winding lines, which allows obtaining a product with high technical specifications that helps in the ease and accuracy of the installation work.

Bottom chassis:

It is a longitudinal bridge (U8), 2 on the length of the chassis, where a 9 mm thick wood is installed between the upper and lower chassis, with cross beams from the (H) bridge 8 cm in width, and the chassis installed by means of 10 cm bonds between the upper chassis and the mechanism chassis, with 4 side flanges are installed and welded to the top bridge.

Floor:

The floor consists of the following:

The floor is built on the chassis of the car and is made of galvanized iron frame on the floor

With cutting inside the throat and fixed with the new chassis and isolate the floor with foam.

The floor is covered with Vervis wood.

With a lamination of the floor from the top, stainless steel is warmed with a folded on the circuit, and then an argon and sides are welded to make the floor a basin. Or the aluminum floor, shaded or glazed, as desired by the customer.

Roof:

It is one piece 10 cm thickness with the following specifications:

• Detail of the galvanized iron frame shaving on the ceiling circle with cutting to cover it, and the inner face is separated from the outside by a wood frame.

The roof covering is pre-painted inside and outside of the galvanized steel sheet.

• Injection of the roof with a polyurethane density of 45 kg per cubic meter by a high pressure injection machine.

Fifth: the front end: –

It is one piece 10 cm thickness with the following specifications:

• Detail of a galvanized iron frame ring on the front end, to be wrapped on it.

Longitudinal cutting of the interface to strengthen and install the cooling device.

Front Facing Packaging: pre-painted galvanized sheet, outside and inside. (Or a fiberglass one piece and one outside).

• Interface injection with a polyurethane density of 42 kg per cubic meter with a high pressure injection machine

Sixth: Aspects:

It is one piece 10 cm thickness with the following specifications:

• Detail of a galvanized iron frame ring on the front end, to be wrapped on it.
• The side profile is pre-painted galvanized sheet outside and inside (or fiberglass one piece and one outside).
• Interface injection with a polyurethane density of 42 kg per cubic meter with a high pressure injection machine

Seven: Doors:

It is a galvanized ring, and the door is laminated from the inside, with a thickness of 8 mm, to secure the hands and hinges. The doors consist of the following:
Galvanized iron frame shaved on the door.
8 mm thickness sheet plating inside the door to install hands and hinges.
Covering the doors inside and outside, pre-painted sheets with a thickness of not less than 7 mm.
Inject the door with polyurethane with a density not less than 42 kg per cubic meter with the high pressure injection machine.
Installing an inch of refrigerated boxes.
Installing two hinges for each door.
Hand fitting for each shutter.
Install hooks on the doors to secure them when opened on the sides of the box.
The number of doors is two doors on the back end and one side door.

All profiles and outer corners are made of reinforced aluminum

Dimensions of the produced panels:

Length up to 1250 cm
Width 100 cm / 115 cm

The thickness of the boards starts from 4 cm to 20 cm

The panels can be covered in decorative wood, stainless steel, aluminum or fiberglass

The panels can be made isolated inside a metal structure coated with pre-painted iron sheet panels fixed together on the metal structure continuously where the product appears as a single piece or can be coated fiberglass and several thicknesses and sizes up to 2.5 meters to 13 meters

And also can form all the gutters of water and angles of all shapes for prefabricated buildings and hangers